Locations

ALL OF THEM. 

Motorcycle, bicycle, scooter, watersports... the list is endless.

It can also clean hard hats for construction workers. 

Proven effective against:

✔ Staphylococcus aureus, E. coli, Pseudomonas aeruginosa, Legionella pneumophila

✔ Human coronavirus, H1N1 influenza virus (EN 14476 Certified)

✔ Gram-positive & Gram-negative bacteria, fungi, yeast

FresHelmet Antimicrobial Fogging Cleaning Solution is powered by Thymol and Silver Ions, our formula combines herbal antimicrobial and deodorizing agents to provide 99.99% microbial reduction, making it ideal for helmets.

Scientifically Proven | Multi-Certified Safety & Effectiveness:

✔ Thymol: U.S. EPA-listed as effective against COVID-19

✔ French Lab ANALYTICE (EN 14476): Eliminates all Coronaviruses & H1N1 in 30 seconds

✔ SGS-certified: Safe & gentle on plastic and leather

✔ ECHA-approved: Harmless to humans, animals, and the environment

✔ TÜV EU REACH SVHC & CMR Toxicity Tested: No harmful, carcinogenic, or reproductive toxins

✔ Validated by TÜV, SGS, and Super Lab under GLP & TAF standards

Yes. The machine is non-invasive and does not use water to clean the helmet so integrated headphone systems will not be damaged.

Yes, under normal operating conditions it should be fine. Most helmet visors, including race visors with anti-mist or anti-fog coatings, are made from polycarbonate which can tolerate short-duration UV exposure.

In our machine, the UV light is used only for a short cycle and at a controlled intensity designed for sanitation purposes. 

1. Make Payment

Depending on the machine you are using, there may be one or two of the following options:

-Direct payment via card reader on the machine or,

-In Store payment required (card or cash accepted) where you will be given a token to put into the machine coin slot to start it. 

2. Choose an Available Chamber

The machine has two cleaning slots: Box 1 and Box 2.

-If one chamber is already running, you can still use the other one.

-Each chamber works independently.

 3.  Place Your Helmet in the Chamber

-Open the selected chamber door.

-Place your helmet inside the cleaning compartment.

-Position the helmet so the interior lining faces the cleaning airflow.

4. Start the Cleaning Cycle

-Press the Start button for your selected chamber.  The box number is shown next to each button.

-The door will lock. Please do not try to open the door once the start button has been pressed. 

-A short tune will play to indicate that the cleaning cycle has begun.

5. Wait for the Cleaning Process

The machine performs a full cleaning cycle which takes 8 minutes. This cleaning cycle steps includes:

Step 1: UV Light

Exposes the helmet to ultraviolet (UV-C) light, which kills bacteria, mould, and viruses on the hard outer surface. 

Step 2: Anti-Microbial Fog

Using advanced misting technology, it delivers an ultra-fine antimicrobial solution that penetrates deep into the helmet’s lining, effectively eradicating bacteria, mould, and viruses hidden within the soft inner padding.

Step 3: Hot Air Drying

Applies controlled warm air circulation to remove remaining moisture, preventing mould growth and ensuring the helmet is completely dry.

Step 4: Scented Mist

Applies a light, helmet-safe fragrance to provide a fresh, clean scent after the cleaning process.

6. Remove Your Helmet

-A short tune will play again to indicate that the cleaning cycle has finished.

-The door will unlock.

-Open the door and remove your clean, dry, and sanitised helmet.

-Close the door and have a nice day!

VIDEO INSTRUCTIONS AVAILABLE ABOVE.

We've tested the machine with all card providers regularly used including Revolut. If the machine is not taking your payment, please contact your contactless solution provider.

Only 8 minutes. You can see the timer counting down on the panel next to the start button.

Step 1: UV Light

Exposes the helmet to ultraviolet (UV-C) light, which kills bacteria, mould, and viruses on the hard outer surface. 

Step 2: Anti-Microbial Fog

Using advanced misting technology, it delivers an ultra-fine antimicrobial solution that penetrates deep into the helmet’s lining, effectively eradicating bacteria, mould, and viruses hidden within the soft inner padding.

Step 3: Hot Air Drying

Applies controlled warm air circulation to remove remaining moisture, preventing mould growth and ensuring the helmet is completely dry.

Step 4: Scented Mist

Applies a light, helmet-safe fragrance to provide a fresh, clean scent after the cleaning process.

Please contact Tech Ventures (Gibraltar) directly via e-mail, Whatsapp or the inbuilt website form.

By using the machine, you agree to the terms and conditions stated below:

1. Service Description

Tech Ventures (Gibraltar) (“the Company”) provides helmet cleaning, sanitising, deodorising, and drying services using specialised equipment. Each standard treatment cycle lasts approximately eight (8) minutes.

2. Acceptance of Service

By submitting a helmet for cleaning, the customer confirms acceptance of these Terms & Conditions and authorises the Company to carry out the service.

3. Helmet Condition

The Company accepts helmets for cleaning on the basis that they are free from major structural defects. The Company is not responsible for pre-existing damage, wear and tear, loose padding, cracked shells, weakened materials, or manufacturing faults.

4. Limitations of Treatment

While reasonable care is taken, the Company does not guarantee complete removal of all stains, odours, bacteria, or contaminants. Results may vary depending on helmet condition, age, and materials.

5. Manufacturer Guidelines and Warranty

Some helmet manufacturers impose specific cleaning and maintenance requirements. It is the customer’s responsibility to ensure that use of this service does not affect any manufacturer warranty.

6. Liability

To the fullest extent permitted under the laws of Gibraltar, the Company shall not be liable for any loss, damage, discoloration, deterioration, or indirect or consequential loss arising from the service, except where caused by proven negligence.

The Company’s total liability shall in all cases be limited to the price paid for the service.

7. Safety Disclaimer

This service does not inspect, repair, certify, or enhance the protective performance of any helmet. Responsibility for helmet safety and compliance with applicable standards remains with the customer at all times.

8. Payment Terms

Payment is due at the time of service. All fees are non-refundable once the cleaning process has commenced.

9. Right to Refuse Service

The Company reserves the right to refuse service to any helmet that is excessively damaged, contaminated with hazardous substances, or unsuitable for machine treatment.

10. Customer Responsibilities

Customers must remove visors, intercoms, cameras, accessories, and personal items prior to cleaning. The Company is not responsible for loss or damage to any such items.

11. Collection and Storage

Helmets must be collected promptly following completion of the service. The Company accepts no responsibility for loss or damage to items left uncollected.

12. Complaints and Claims

Any complaint or claim must be notified to the Company at the time of collection. Failure to do so may result in the claim being declined.

13. Force Majeure

The Company shall not be liable for any failure or delay in performance caused by events beyond its reasonable control.

14. Data Protection

Personal data is processed in accordance with applicable Gibraltar data protection legislation and will not be disclosed to third parties without lawful basis.

15. Governing Law and Jurisdiction

These Terms & Conditions shall be governed by and construed in accordance with the laws of Gibraltar. The courts of Gibraltar shall have exclusive jurisdiction in respect of any dispute.